#457- Sliding Glass Door Roller Assembly for Binning Pan American Sliding Glass Doors
Click here to enlarge
The Sliding Glass Door Roller Assembly for Binning Pan American Sliding Glass Doors replaces door rollers used on Binning Pan American sliding glass doors. The assembly features extruded aluminum housing and a 1-1/2 in. diameter steel wheel.
- Used on binning pan American doors
- Extruded aluminum housing
- Steel wheel
- Replacement roller
| Details | |
|---|---|
| Depth | 2.125 in. |
| Height | 1.375 in. |
| Width | 0.875 in. |
| Material | Aluminum |
| Weight | 0.25 lb. |
Installation Instructions/Instrucciones para la Instalacion
- To remove door, open completely, lift up and tilt out.
- To remove roller, remove mounting screw. If you have a second mounting screw, you may have to remove the bottom door frame by carefully tapping it off. Replace roller and install mounting screws. Place vinyl “u” channel back on glass and tap bottom frame back in place.
- Adjust rollers by turning the adjustment screw in the back of the roller and adjust handle strike if necessary.
- Para remover la puerta, abra completamente, levanter y gire hacia afuera.
- Para remover el rodillo, remueva el tornillo de montaje. Si tiene un segundo tornillo de montaje, es posible que tenga que quitar el marco inferior cuidadosamente tocandolo suavemente. Cambie el rodillo e instale los tornillos de montaje. Re-instale vinilo tipo “u” en el vidrio y monte el marco inferior.
- Ajuste los rodillos rotando el tornillo de ajuste en la parte trasera del rodillo y ajuste el mantenedor de la cerradura si fuera necesario.
Sliding Screen Doors
Swinging Screen Doors
Sliding Glass Doors
Closet Door
Entry Door
Garage Door
Shower Door