#10740- 1-1/2 in. Stainless Steel Sliding Glass Door Roller
Click here to enlarge
This sliding glass door roller features extruded aluminum housing. It comes with a 1-1/2 in. stainless steel wheel for long lasting life. The roller is used on Wallace brand glass doors and other manufacturers.
- Extruded aluminum housing
- 1-1/2 in. stainless steel wheel
- Replacement roller assembly
- Allows you to easily operate your sliding glass door
Details
Depth 2.375 in.
Height 1.438 in.
Width 0.75 in.
Material Stainless Steel
Weight 0.25 lb.
Installation Instructions/Instrucciones para la Instalacion
- To remove door, open completely, lift up and tilt out.
- To remove roller, pry open bottom frame to free tabs on roller. Slide new roller into place until roller tabs are locked in the frame.
- Adjust rollers by turning the adjusment screw in the back of the roller and adjust handle strike if necessary.
- Para remover la puerta, abra completamente, levanter y gire hacia afuera.
- Para quitar rodillo, palanquee el marco inferior hasta que las pestañas del rodillo queden libres y deslice el rodillo hacia afuera. Deslice el rodillo nuevo en su lugar hasta que las pestañas del rodillo se asequren en su lugar.
- Ajuste los rodillos rotando el tornillo de ajuste en la parte trasera del rodillo y ajuste el mantenedor de la cerradura si fuera necesario.
Sliding Screen Doors
Swinging Screen Doors
Sliding Glass Doors
Closet Door
Entry Door
Garage Door
Shower Door