Pages Navigation Menu
Categories Navigation Menu

#10133- 1-1/2 in. Nylon Wheel Wallace Patio Door Roller Assembly

Click here to enlarge

This sliding glass door roller features extruded aluminum housing. It comes with a 1-1/2 in. ball bearing nylon wheel. This roller is used on Wallace brand glass doors.

  • Extruded aluminum housing for a rust free long life
  • 1-1/2 in. ball bearing nylon wheel
  • Allows for easy operation of your sliding glass door
  • Used on doors manufactured by Wallace Window Corp.

Depth2.375 in.
Height1.438 in.
Width0.75 in.
Weight 0.18 lb.

Installation Instructions/Instrucciones para la Instalacion

  1. To remove door, open completely, lift up and tilt out.
  2. To remove roller, pry open bottom frame to free tabs on roller. Slide new roller into place until roller tabs are locked in the frame.
  3. Adjust rollers by turning the adjusment screw in the back of the roller and adjust handle strike if necessary.


  1. Para remover la puerta, abra completamente, levanter y gire hacia afuera.
  2. Para quitar rodillo, palanquee el marco inferior hasta que las pestañas del rodillo queden libres y deslice el rodillo hacia afuera. Deslice el rodillo nuevo en su lugar hasta que las pestañas del rodillo se asequren en su lugar.
  3. Ajuste los rodillos rotando el tornillo de ajuste en la parte trasera del rodillo y ajuste el mantenedor de la cerradura si fuera necesario.


Buy It On-Line

Print Friendly, PDF & Email