Pages Navigation Menu
Categories Navigation Menu

#10745- 1-1/2 in. AAA Aluminum Patio Door Roller Assembly

Click here to enlarge

Click here to enlarge

This sliding glass door roller assembly is used by AAA Stampings. Outer housing made of extruded aluminum for long, rust free life. It features a 1-1/2 in. ball bearing steel wheel.

  • Adjustable ride height
  • Allows for easy operation of your sliding glass door
  • Extruded aluminum housing won’t rust
  • Used by AAA aluminum stampings

Details 
Depth2.125 in.
Height1.375 in.
Width0.875 in.
Material Aluminum
Weight 0.25 lb.

 

Installation Instructions/Instrucciones para la Instalacion

  1. To remove door, open completely, lift up and tilt out.
  2. To remove roller, pry open bottom frame to free tabs on roller. Slide new roller into place until roller tabs are locked in the frame.
  3. Adjust rollers by turning the adjusment screw in the back of the roller and adjust handle strike if necessary.
  1. Para remover la puerta, abra completamente, levanter y gire hacia afuera.
  2. Para quitar rodillo, palanquee el marco inferior hasta que las pestañas del rodillo queden libres y deslice el rodillo hacia afuera. Deslice el rodillo nuevo en su lugar hasta que las pestañas del rodillo se asequren en su lugar.
  3. Ajuste los rodillos rotando el tornillo de ajuste en la parte trasera del rodillo y ajuste el mantenedor de la cerradura si fuera necesario.

 

Buy It On-Line

Print Friendly, PDF & Email