Pages Navigation Menu
Categories Navigation Menu

#383-7/8 in. Wheel Guide for Bi-Fold Doors

Click here to enlarge

Click here to enlarge

This Bi-Fold door pivot and guide is constructed from nylon and has a steel shaft. It features a top mount design that is easy to install. This style pivot fits into a 3/8 in. opening.

  • Provides easy operation of wooden bi-fold doors
  • 7/8 in. diameter nylon wheel
  • Compatible with doors made by Acme, Stanley and other manufacturers
  • Made with steel housing and a plastic wheel

Depth0.875 in.
Height2.625 in.
Width0.4375 in.
Roller Width0.875
Material Steel
Wheel MaterialPlastic
Weight 0.07 lb.

Installation Instructions/Instrucciones para la Instalacion

  1. Remove door by lifting up and tilting bottom up.
  2. Replace bottom pivot with new one
  3. Adjust vertical position by rotating the wheel on the pivot. Doors should clear header.
  4. Adjust the door horizontally by lifting the bottom pivot and sliding it into the required slot on the jamb bracket leaving at least a 1/8” gap between the doors and the jamb.


  1. Desmonte la puerta levantandola y girando hacia afuera.
  2. Remueva el pivote inferior viejo e instale el Nuevo.
  3. Ajuste la puerta verticalmente rotanto la rueda en el pivote. La puerta no debe tocar el travesano superior.
  4. Para ajustar la puerta horizontalmente levante el pivote inferior y deslice en la ranura de la base dejando por lo menos 1/8” espacio entre la puerta y la pared.


Buy It On-Line

Print Friendly, PDF & Email