#466S- 1-1/2 in. Steel Wheel Lawson Patio Door Roller Assembly
Click here to enlarge
This sliding glass door roller assembly allows you to easily operate your door. Outer housing made of extruded aluminum for long, rust free life. Used by Lawson Industries and other manufacturers.
- 1-1/2 in. ball bearing steel wheel for long lasting life
- Adjustable ride height
- Aluminum extruded outer housing won’t rust
- Also used by weather-tite industries
| Details | |
|---|---|
| Depth | 2.438 in. |
| Height | 1.563 in. |
| Width | 0.75 in. |
| Material | Aluminum |
| Weight | 0.17 lb. |
Installation Instructions/Instrucciones para la Instalacion
- To remove door, open completely, lift up and tilt out.
- To remove roller, remove mounting screw. If you have a second mounting screw, you may have to remove the bottom door frame by carefully tapping it off. Replace roller and install mounting screws. Place vinyl “u” channel back on glass and tap bottom frame back in place.
- Adjust rollers by turning the adjustment screw in the back of the roller and adjust handle strike if necessary.
- Para remover la puerta, abra completamente, levanter y gire hacia afuera.
- Para remover el rodillo, remueva el tornillo de montaje. Si tiene un segundo tornillo de montaje, es posible que tenga que quitar el marco inferior cuidadosamente tocandolo suavemente. Cambie el rodillo e instale los tornillos de montaje. Re-instale vinilo tipo “u” en el vidrio y monte el marco inferior.
- Ajuste los rodillos rotando el tornillo de ajuste en la parte trasera del rodillo y ajuste el mantenedor de la cerradura si fuera necesario.
Sliding Screen Doors
Swinging Screen Doors
Sliding Glass Doors
Closet Door
Entry Door
Garage Door
Shower Door