Pages Navigation Menu
Categories Navigation Menu

#385- Bi-Fold Closet Door Bottom Pivot

Click here to enlarge

This bi-fold closet door bottom pivot is used by Acme, Stanley and other bi-fold closet doors. The pivot is made with steel for durability. It features a hex head bolt for easy vertical adjustment.

  • 7/16 in. diameter steel body
  • For doors up to 50 lbs.
  • Hex head bolt for easy adjustment
  • Fits doors 1 in. to 1-3/8 in. wide

Details 
Depth0.438 in.
Height1.563 in.
Width0.438 in.
Material Steel
Weight 0.14 lb.
FinishMIll

Installation Instructions/Instrucciones para la Instalacion

  1. Remove door by lifting up and tilting bottom up.
  2. Replace bottom pivot with new one
  3. Adjust vertical position by rotating the wheel on the pivot. Doors should clear header.
  4. Adjust the door horizontally by lifting the bottom pivot and sliding it into the required slot on the jamb bracket leaving at least a 1/8” gap between the doors and the jamb.

 

  1. Desmonte la puerta levantandola y girando hacia afuera.
  2. Remueva el pivote inferior viejo e instale el Nuevo.
  3. Ajuste la puerta verticalmente rotanto la rueda en el pivote. La puerta no debe tocar el travesano superior.
  4. Para ajustar la puerta horizontalmente levante el pivote inferior y deslice en la ranura de la base dejando por lo menos 1/8” espacio entre la puerta y la pared.

 

Buy It On-Line

Print Friendly, PDF & Email