Pages Navigation Menu
Categories Navigation Menu

#384- Bi-Fold Closet Door Top Pivot Bracket

Click here to enlarge

Click here to enlarge

The Barton Kramer Bi-Fold Closet Door Top Pivot is ideal for use as a pivot replacement with Acme, Stanley and other bi-fold closet doors. The pivot is made with steel for durability and is spring loaded for easy installation. It works with wooden doors that have 1-1/2 in. deep holes with a 7/16 in. diameter.

  • Top pivot for bi-fold closet doors
  • Used by Acme, Stanley and other door manufacturers
  • Steel construction for durability
  • For 7/16 in. diameter holes that are 1-1/2 in. deep
  • Spring loaded for easy installation

Details
Depth0.4375 in.
Height2.5625 in.
Width0.4375 in.
Material Steel
Weight 0.06 lb.
FinishMIll

Installation Instructions/Instrucciones para la Instalacion

  1. Remove door by lifting up and tilting bottom up.
  2. Replace bottom pivot with new one
  3. Adjust vertical position by rotating the wheel on the pivot. Doors should clear header.
  4. Adjust the door horizontally by lifting the bottom pivot and sliding it into the required slot on the jamb bracket leaving at least a 1/8” gap between the doors and the jamb.

 

  1. Desmonte la puerta levantandola y girando hacia afuera.
  2. Remueva el pivote inferior viejo e instale el Nuevo.
  3. Ajuste la puerta verticalmente rotanto la rueda en el pivote. La puerta no debe tocar el travesano superior.
  4. Para ajustar la puerta horizontalmente levante el pivote inferior y deslice en la ranura de la base dejando por lo menos 1/8” espacio entre la puerta y la pared.

Buy It On-Line

Print Friendly, PDF & Email