Pages Navigation Menu
Categories Navigation Menu

#453- Yale Sliding Glass Door Replacement Roller

Barton Kramer Book

Click here to enlarge

This sliding glass door roller is used on Yale Ogron sliding glass doors. The assembly features a 1-1/4 in. steel wheel. Extruded aluminum housing is adjustable.

  • Used on yale ogron doors
  • Extruded aluminum housing
  • 1-1/4 in. diameter steel wheel
  • Replacement roller

Details 
Depth2.375 in.
Height1.4375 in.
Width0.75 in.
Material Aluminum
Weight 0.21 lb.

Installation Instructions/Instrucciones para la Instalacion

  1. To remove door, open completely, lift up and tilt out.
  2. To remove roller, remove mounting screw. If you have a second mounting screw, you may have to remove the bottom door frame by carefully tapping it off. Replace roller and install mounting screws. Place vinyl ā€œuā€ channel back on glass and tap bottom frame back in place.
  3. Adjust rollers by turning the adjustment screw in the back of the roller and adjust handle strike if necessary.

 

  1. Para remover la puerta, abra completamente, levanter y gire hacia afuera.
  2. Para remover el rodillo, remueva el tornillo de montaje. Si tiene un segundo tornillo de montaje, es posible que tenga que quitar el marco inferior cuidadosamente tocandolo suavemente. Cambie el rodillo e instale los tornillos de montaje. Re-instale vinilo tipo “u” en el vidrio y monte el marco inferior.
  3. Ajuste los rodillos rotando el tornillo de ajuste en la parte trasera del rodillo y ajuste el mantenedor de la cerradura si fuera necesario.

 

Buy It On-Line

Print Friendly, PDF & Email